Skip to main content

Expert answers

Worked answers to common questions

Step-by-step explanations across 15 subjects. Read how a tricky topic breaks down, then bring your own question to a tutor.

Sample answers

These are sample explanations that show the kind of help tutors give. They are examples, not answers from a specific tutor.

3 answers in Engineering

  • Engineering

    How do you solve a truss using the method of joints?

    Find the support reactions from equilibrium of the whole truss, then go joint by joint, starting where only two member forces are unknown, and solve ΣFx = 0 and ΣFy = 0. Assume every member is in tension; a negative answer means compression. In the example, the sloping members carry 8.33 kN in compression and the bottom chord 6.67 kN in tension.

  • Engineering

    How do you find beam reactions and draw shear force and bending moment diagrams?

    Find the support reactions with ΣM = 0 about one support and ΣFy = 0. The shear diagram steps by the size of each point load; the bending moment changes by the area under the shear diagram and peaks where shear crosses zero. A 6 m simply supported beam with 12 kN at 2 m has reactions of 8 kN and 4 kN and a maximum moment of 16 kN·m.

  • Engineering

    How do you solve series and parallel resistor circuits?

    Resistors in series add: R = R₁ + R₂. In parallel, 1/R = 1/R₁ + 1/R₂ (or R₁R₂ ÷ (R₁ + R₂) for two). Reduce the circuit to one equivalent resistance, find the total current with Ohm's law (V = IR), then work back out. 4 Ω in series with 6 Ω and 12 Ω in parallel on 12 V draws 1.5 A.

Get help that fits your question.

Post your question with no posting fee, compare offers from tutors who know the subject, and choose who to work with.